Rigging

• All new halyards and sheets + many trimlines
• Raceoptimized mainsheet
• Prep for jib furling system
• Mastjack Enerpac 392 with two hydraulic cylinders in carrying case (serviced 2016)
• Clamps to disassemble mast (2x)
• Two forestays: adjustable racing forestay (currently installed) and furling forestay with Reckman RS2000 furler
• Lazy jack with bag – main
• Spare/singel backstay PBO
• Foldable work table – handy for mast rigging
• Spinnaker socket/feeder – never used

Sails

• 2 good mainsails: one carbon with tafta(white) normal size, and one carbon with big square fathead – really powerfull and fun (with twin backstay); owners comments
• 1 Jib L Matrix Carbon 2008 (fully recut and ok).
• 1 Jib M Matrix Carbon 2011 
• 1 Jib H Matrix Carbon 2008 (ok).
• 1 Jib L/M Matrix Carbon 2012 (race sail – full race ready)
• 1 Code 1 CZ30 2008 (ok).
• 1 Spin L Airx 2010.
• 1 Spin M 0.9 2011.
• 1 Spin H 1.5 2008 (hardly used)
• 1 code 0 2012 (as good as new)
• 1 spin reacher

Training/cruising

• Spin H
• Spin L

Accommodations

• 6 x lightweight cushions
• All bunks, doors, wardrobedoors removable
• Upholstery - alcantera
• Table with foldable leafs (carbon light weight, black)  and teak saloon table
• Carbon light weight entry hatch
• 2 set floor boards – one in wood and one for race, in carbon

Galley

• Refrigerator opening from the top, Isotherm cooling unit
• hot and cold water in the galley, toilet/shower and on the aft deck
• Carbon worktop, pantry

Deck and Cockpit

• More new blocks and lead
• Refit steering system, raceoptimized no slug
• Refit clams
• Primary and main winches Carbon Harken
• Detachable Quick electric anker winch
• Fortress aluminium anker with lead rope
• Composite anker fold-out at the bow for cruising, only used once
• Harken Electric winch (cabin roof port side)
• 2 carbon steering wheels
• Teak on cockpit sole
• foldable alu cleats
• Carbon deck patches for spinnaker sheet turning blocks
• Carbon foot support for mainsheet trimmer
• many handles and 4 new fastgrib/one hand
• Lifeline in dyneema for racing and wire for cruising
• Black canvas backs for pit, mainsheet, cockpitropes 

Electrics

• Led Lights
• Red light in saloon
• Bose speaker 4 speakers, bluetooth connection kit (2015)
• 140 ah new battery for crusing – never used
• 5 electric cables, shore power, work, etc
• 2 electric cooling boxes 12v and 230 v and 110 v
• Small vacuum cleaner

Safety

• New ORC MOB equipment
• 2 x liferaft (1 soft + 1 hard)
• New ORC MOB equipment
• 12 Harnes saftety straps –10 never used
• Jon Buoy

Electronics and Navigational Gear

Pilot system

• Pilot display (cockpit)
• B&G WR-10 wireless remote control
• Jefa LD100 Electric Drive

Upgraded in 2015:

B&G H5000 pilot

• B&G 5000 Hercules CPU & pilot
• H5000 Zeus2 plotter – 7 inch (cockpit)
• SIMRAD wifi module (for Zeus display on tablet)
• 2020 display (5 x, carbon mastbracket)

Other:

• Extra cruising (spare) navi system at helm station, GPS plotter
• New Intercom and VHF in cockpit
• Software optimized B&G
• 4G internet NMT (in mast top)
• TRX Carbon AIS transponder
• ICOM 505 VHF with remote unit 162B in cockpit
• FIT-PC3 low power computer with SVGA screen (chart table) (upgrade)
• Spare VHF antenna never used
• New/spare flat rubber keyboard (one is in navistation) – never used
• Big repeaterscreeen for cockpit pedestal – I use this only once – look like new (the pedestal in cockpit is mostly for cruise or long distance race, not to race)
   

Additional

• Cockpit tent
• Full Integrated removeable demumidifier (very powerfull)
• Shore Cradle (refit for keel on/off)
• Loaded with a very lot of spareparts and tools, and extra
• 2 x light weights anchers racing, + cruising (nice high gloss stainless anchor)
• new Storage covers (canvas) for mast, spreader, boom, spi-pole, winches, steering wheel etc.
• Many jerry cans
• Many boxes with spares parts
• Suitcase with 300 tool units
• Straps for gear
• Race sleeping underlay, ORCi rule
• Many black rope/gear bags