General

Construction:

• Engineered to ISAF Category 1 Safety regulations / ISO Regulations
• Hull is very well and strong build, and can resist  very tough conditions
• Structural Engineers: SDK Structures USA.
• 100% carbon prepreg / cured at high temperature.
• Thermoformed damage tolerant foam cores.
• Engineered weight controlled toughened core adhesive films.
• Bulkheads / Structures: Carbon prepreg.
• Finite Element Analysis of keel floor and principal structures.
• Unique monocoque single piece bottom shell structure.
• Weight controlled toughened core adhesive films.
• 100% carbon secondary bonding. 
• New 2022: Bottom Repainting for Durepox
  

Hull/deck

• 100% carbon prepreg / cured at high temperature
• Thermoformed damage tolerant foam cores
• Engineered weight controlled toughened core adhesive films
• Engineered to ISAF Category 1 Safety regulations / ISO Regulations
• Hull is very well and strong build, and can resist  very tough conditions
  
  

Keel & Rudder

• New 2019 Keel 3.2M draft from McConaghy China, fabricated weldox 700 steel keel fin, cast and CNC milled bulb.
• New 2022: Rudder foil high ratio, Carbon autoclaved prepreg stock and blade 
• JP2 rudder Bearing- water tight & self aligning.
• Custom carbon tiller with Spinlock extension + spare tiller/ extension.
• Keel socket integral with hull shell laminate-Keel socketed to hull for easy and quick removal and installation, and enhanced safety and stiffness.

Rigging

• Southern Spars carbon rig with engineered high modulus fibre for increased stiffness and weight saving.
• Two piece rig with joiner for packing and transportation.
• Two spreader rigs with carbon aerofoil spreaders.
• Nitronic 50 rod rigging.
• Gorilla racing Headfoil + Spare Harken  Headfoil Twin groove.
• Hydraulic Backstay Deflectors 
• Internal mast jack with pump.
• Custom furler for forestay adjustment
• New 2022: SK99 running backstays 
• PBO inshore running backstays, 2018, Future Fibres, 
• Kevlar offshore running backstays, since boat launch, stainless steel end fittings, heavier duty.
• Mast is fitted with 7 Halyards: Main, 2x Spin, 2x Jib, Fro, GS +spares
• Halyard locks x4 for: Main, Spinnaker, Jib, Fro.
• 1:1 main halyard with reef bullets on it.
• New sheets and control lines 2022
• full serviced and scanned mast and rig  2022
• Carbon boom, carbon gas vang strut.
• Mast base with additional sliding plate and screw adjustment.
• 2.2m Bowsprit carbon prepreg, two internal tack lines new 2022
• 1.2m Bowsprit carbon prepreg, two internal tack lines.

Sails

Kites

• A2-C 2022 Quantum Bainbridge Airx 600
• A1,5-C 10.2019 North Sails superkote 50/60
• A2-B 10.2019 North Sails superkote 60/80
• A2-A 2018 North Sails
• Code 0 2018 North Sails laminate
• A1-B 2015 North Sails
• A0-A 2015 North Sails laminate
• FRO-A 2015 North Sails laminate
• A1-A 2013 North Sails

Headsails

• J2-D 2022 Quantum M7+ Lite skin Black 17000dpi
• Blast Reacher 2022 Quantum M7+Cableless 14000dpi
• J1D 2019 North Sails 3di raw 870 12,6dpi
• J2C 2019 North Sails 3di raw 870 16,8dpi
• SS 2015 North Sails laminate
• J1-c 2015 North Sails 3di
• J2-B 2014 North Sails 3di 780
• J2-A 2013 North Sails 3di 780 dynema/carbon 16,8dpi
• J3-A 2013 North Sails 3di 780 dyneema/carbon 19,6dpi
• J3+A 2013 North Sails 3di 760 aramid/dynema 2240dpi
• J4-A 2013 North Sails 3di 760 aramid/dyneema 22,4dpi
• JT 2013 North Sails 3di 760 aramid/dyneema 14,7 dpi
• GS 2013 North Sails 3di 760 aramid/dyneema 12,6dpi
• storm jib 2013 North Sails

Mainsails

• MN4 may 2022 Quantum M7+ Lite skin Black
• MN3 November 2018 North Sails 3Di RAW 870 w/C-Tech battens
• MN2 September 2013 North Sails 3Di 760 (Aramid/Dyneema/ Carbon)
• MN1-I September 2013 North Sails 3Di 780 (Dyneema/Carbon)
• Storm trysail september 2013 North Sails
• MN0-D  Delivery dacron

Accommodations

• Optimised open plan interior for ease of sail handling and spinnaker take down drop. 
• 6x adjustable sleeping bunks( new 2021), 2 fixed berths ( new cushions 2022), forward V-berth.
• EVA foam on the floor. 
• Red and White LED interior lighting / aircraft spec wiring.
• Ventilation fans over the bunks.
• Enclosed WC 
• 1 burner wireframe cooker.
• 1x Hi-ratio electric Bilge pump new 2022
• 1x electric bilge pump
• 2x hand bilge pump

Deck and Cockpit

• Full SeaDek EVA  in the cockpit. 
• Deck anti grip Repaint new 2022
• Diverse Performance Spinnaker Take down system ( connected to Grinder) 
• Lewmar Coffee Grinder system
• Harken Black Magic Air blocks deck gear and regulations.  
• New 2022: Jib up/dwn + in/out regulation system (block+lines)
• Pit Spinlock XC jammers.
• Spin sheet Spinlock XC jammers( double) 
• Mainsheet Spinlock XC jammers
• Lewmar OneTouch Winch Handles
• Lewmar 60/3 GPST Primary Winches Custom Winches gear ratio for better performance
• Lewmar 50/2 GPST Main Winches
• Lewmar 40st Runner + pit Winches 
• New winches drums(2019)
• Karver Furler & swivel 
• Diverse lightweight Hi Load soft padeyes.
• Light weight custom carbon forward hatch with pneumatic seal, big internal radius for ease of gennaker hoist and drops.
• Composite socketed stanchions / alloy fwd rail,
• Composite aft aerofoil stanchion.
• Offshore carbon Companionway Wash-board
• Cockpit Rope tail bags

Engine

Fully serviced and upgraded engine 2022

• 30hp Yanmar engine with sail drive 
• Gori racing propeller new 2022
• 42 litres fuel tank + 70l delivery tank  
• Engine box with bottom step and electronics display
• Cockpit Spinlock control  new 2022

Safety

• OSR cat 2 ready ( all equipment needed)  
• Superlight Carbon Liferaft

Electronics and Navigational Gear

• Navigation Computer (new 2022)+ Nav station accessories
• B&G H3000 Motion CPU
• B&G Halcyon Gyro Processor+ Halcyon Gyro Stabilised Compass 
• NMEA2000 + Fastnet/ NMEA0183 via converter
• Mast Bracket: 3x20/20 repeaters, 1x GFD, 1x H5000 Graphic display
• 2x cockpit GFD new 2022
• B&G Zeus chart plotter inside the boat 
• B&G MHU carbon windwand
• 2x spd Sensor ( port/ Starboard)+ water temp
• Airmar Depth sensor
• B&G Halcyon 2000
• B&G Motion Sensor
• Forestay Load-sensor 
• Baroplug (barometer+Temperature) (new 2022)
• Rudder sensor new 2022
• Runner Deflector length sensor new 2022
• B&G VHF and AIS System
• B&G additional Wireless VHF Handset
• Navico GO-FREE wifi/ NMEA2000 wifi
• IstarGPS: Hi-Speed& accuracy GPS 
• B&G 4G radar 
• Satelite FleetOne ( antena + modem + handset) 
• Option for SSB: Icom IC-M802 HF/SSB with AT-140 Tuner (12VDC)VHF
• Carbon mounting pole for Radar & FleetOne 
• Raymarine st2000 Tiller pilot
• 180 amp ACG house battery.
• 60amp ACG engine start battery.
• Led Navigation lights.

Additional

• Assembled/folded Cradle for easy transportation. 
• Single point lifting ( Removable eye bolt fitting) 
• Cockpit floor cover, boom cover, winch covers, onshore full boat cover
• Sun light tent, sun/rain havy tent.
• Miscellaneous tools and spares.
• 2 x foldableAnchor.
• Fenders and dock lines.